+44 (0)1202 599922

Product Categories

Secure Online Store

Visit our online store to place your order quickly and securely

FAST DELIVERY FROM UK STOCK

CNC Drive Kits

CNC Drive Kit 1
CNC Drive Kit 1
This 3Nm CNC Drive kit 1 is designed for 3 axis of stepper control (X, Y & Z) & consists of the following:
  • 1 X Breakout board
  • 3 X Microstepping Drivers, 4.2A (model: MSD542-v2.0)
  • 3 X Stepper motors, 3Nm (Low inductance)(model: M60STH88-3008DF)
  • 2 X Regulated power supplies 36V, 7A (model: SPS250-36)
CNC Drive Kit 2
CNC Drive Kit 2
CNC Drive kit 2 is designed for large 3 axis CNC machines requiring the torque up to 12Nm. This kit consists of the following:
  • 1 X Breakout board
  • 3 X Microstepping drives with Integrated power supply, 7.8A (model: MSD2282)
  • 3 X Stepper motors, 12Nm (model: FL86STH156-4208A-H)
CNC Drive Kit 3
CNC Drive Kit 3
CNC Drive kit 3 is designed for 3 axis of stepper control (X, Y & Z) & consists of the following:
  • 1 X Breakout board
  • 3 X Microstepping Drives, 4.2A (model: MSD542-v2.0)
  • 3 X Stepper motors (Low inductance), 1.86Nm (model: M57STH76-2808D-1)
  • 2 X Regulated power supplies 36V, 7A (model: SPS250-36)
CNC Drive Kit 4
CNC Drive Kit 4
CNC Stepper driver kit 4 is designed for 3 axis of stepper control (X, Y & Z). It consists of the following:
  • 3 X Stepper motors, 12Nm (model: FL86STH156-4208A-H)
  • 3 X Microstepping Drives, 4.2A (model: MSD542-v2.0)
  • 2 X Regulated power supplies 36V, 7A (model: SPS250-36)
  • 1 X Breakout board (model: MCP25)

According to Geoffrey in the Historia and much subsequent literature which he inspired, Avalon is the place where King Arthur is taken after fighting Mordred at the Battle of Camlann to recover from his wounds. Welsh, Cornish and Breton canadian pharmacy cialis 20mg claimed that Arthur had never really died, but would inexorably return to lead his people against their enemies. The Historia also states that Avalon is where his sword Excalibur was forged.

CNC Drive Kit 5
CNC Drive Kit 5
CNC Stepper drive kit 5 is designed for 3 axis of stepper control (X, Y & Z) to provide 12Nm torque, more powerful performance with output higher current. It consists of the following:
  • 3 X Stepper motors, 12Nm (model: FL86STH156-4208A-H)
  • 3 X Stepper drives,80VDC, 7.8A (model: MSD880)
  • 2 X Regulated power supplies, 65V, 6A (SPS400-65)
  • 1 X Breakout board (model: MCP25)