Motion Control Products offers the widest range of 2-phase microstepping drives: EM-S & DMD stepper drives.
Our new generation of digital stepper drives from Leadshine, known as the EM-S range, feature a large number of advantages due to precise analogue current control giving superior high speed torque, low stepping noise and motor temperature.
Our DMD range of stepper drives is the next generation of digital stepper controls based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives in the markets.
Both EM-S & DMD stepper drives widespread use in application areas such as packaging machinery, CNC engraving & cutting machines, pick-and-place devices and textile equipment.
EM415S Stepper Drive
- Output current: 0.3 - 1.5A
- Supply voltage: 18 - 36VDC
- Configuration: DIP switch or software
- Control signals: PUL/ DIR & CW/ CCW
EM422S Stepper Drive
- Output current: 0.3 - 2.2A
- Supply voltage: 18 - 36VDC
- Configuration: DIP switch or software
- Control signals: PUL/ DIR & CW/ CCW
EM542S Stepper Drive
- Output current: 0.5 - 4.2A
- Supply voltage: 20 - 50VDC
- Configuration: DIP switch or software
- Control signals: PUL/ DIR & CW/ CCW
EM556S Stepper Drive
- Output current: 0.5 - 5.6A
- Supply voltage: 20 - 50VDC
- Configuration: DIP switch or software
- Control signals: PUL/ DIR & CW/ CCW
EM870S Stepper Drive
- Output current: 0.5 - 7.0A (5.0 RMS)
- Supply voltage: 20 - 80VDC
- Configuration: DIP switch or software
- Control signals: PUL/ DIR & CW/ CCW
EM882S Stepper Drive
- Output current: 0.5 - 8.2A
- Supply voltage: 20 - 80VDC
- Configuration: DIP switch or software
- Control signals: PUL/ DIR & CW/ CCW
DMD870 Stepper Drives
- Output current: 0.5 - 7.0A
- Supply voltage: 18 - 80VDC
- Configuration: DIP switch or software
- Control signals: PUL/ DIR & CW/ CCW
DMD805 with Analogue Input
- Output current: 0.5 - 5.0A
- Supply voltage: 18 - 80VDC
- Configuration: Software
- 4 operating modes: 0-5V speed, low/high speed, external POT and Pulse/direction